company-logo

# 1 - Lotos Lt3500 35amp Air Plasma Cutter, 2/5 Inch Clean Cut, 110v/120v Input With Pre Installed Npt Quick Connector, Portable & Easy Quick Setup Metal Cutter

The LOTOS LT3500 Plasma Cutter is designed for light cutting projects. This unit is the most compact plasma cutter one can find in the market and weights only 8kg (17.6lbs). In the meantime, this powerful unit is powerful enough to cut 10mm (2/5inch) metal with 15mm (3/5inch) severance thickness, making it an ideal choice for cost conscious DIY hobbyists. The LT3500 is similar to the LT3200 except it has a higher amperage range up to 35 A under 110 V, has a pre-installed air filter and air gauge ready to be connected your air compressor with the stand NPT 1/4"…


  • PORTABLE and POWERFUL: The LT3500 can easily cut 2/5" (10 mm) metal with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • QUICK Setup: The pre-installed NPT 1/4" industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connect to your existing 110v wall outlet. The whole machine can be setup quickly within 1 min.
  • INPUT & OUTPUT: 110V-125V, 1PH, 50/60Hz @ 30 A input; Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5" ideal clean cut and 3/5" maximum severance cut
  • SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • PACKAGE INCLUDES power supply, cutting torch, consumables, ground clamp, Pre-installed NPT 1/4" industry type D plug and Air filter regulator.


company-logo

# 2 - Vivohome Dc Inverter Plasma Cutter Cutting Machine Dual Voltage 110v/220v Cut-50


  • Improved cutting ability, compared with the oxy-acetylene cutting, the cutting speed increased by 1.8 times
  • 50Hz frequency is inverted to high frequency (frequency is over 100KHz) by MOSFET
  • The step down voltage and rectification current, inverter power supply generates powerful DC welding currant through PWM technology
  • Thick steel plate cutting is very convenient , fast and economical. Max cutting thickness:1-12mm
  • Can be used widely, it is suitable for cutting stainless steel, alloy steel, mild steel, copper and other metal materials


company-logo

# 3 - Lotos Ltp5000d 50amp Non-touch Pilot Arc Plasma Cutter, Dual Voltage 110v/220v, 1/2 Inch Clean Cut

Since 2000 Lotos operated by Zion Global LLC introduced Inverter Technology in welding and cutting machines. Lotos Plasma cutters are designed especially for businesses and DIY (do-it-yourself) users, while fully accommodating the demands of professional operators.


  • Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum
  • Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag;PAPST advanced German cooling system
  • MOSFET transistor produces a uniform output to enable cutting of thin metal and can reach high power output for cutting thick metal
  • Dual voltage capability allows the machine to run directly on 220V 50/60 Hz power, or on 110V 50/60 Hz with the use of a pigtail (sold separately)
  • Includes a plasma torch, ground clamp and cable, air regulator, air hose, and air hose connections. Suitable for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc
  • 50 Amp Digital Inverter Air Plasma Cutter
  • Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)
  • PAPST Advanced German Cooling System
  • Max Severance Thickness: 3/4"
  • Max Cut Thickness: 1/2"


company-logo

# 4 - Sungoldpower 50a Air Plasma Cutter Inverter Dc Digital Display Igbt Portable With Accessories Welding Machine Inverter Cutting 50amp 110v And 220v

PLS NOTE:New update item ! 110v and 220v dual voltage, with 1 plug for USA 220v and 1 plug for USA 110v . Our Cut50 is IGBT tech, not MOSFET. IGBT machine is far superior and more stable than MOSFET machine. The MOSFET Cut50 can only cut max 12mm, but our IGBT machine can cut max 15mm. IGBT tech is is more superior than MOSFT tech in the following aspects: Peak current capabilities, forward resistance and temperature drift, switching speeds and response time, logic level switching and isolation, gate capacitance oscillation, cost, effectiveness at higher voltages, heat dissipation requirements Features:…


  • 1.IGBT soft-switch technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught
  • 2.IGBT inverter soft switch, DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands
  • 3. Adjustable cutting current to satisfy the cutting demands based on different kinds of material and thickness of working plate
  • 4.Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection and lack of compressed air pressure protection
  • 5.Suitable for cutting carbon steel, stainless steel and alloy steel, copper, and aluminum etc. Widely used


company-logo

# 5 - Super Deal Dc Inverter Plasma Cutter Machine With Screen Display Dual Voltage 110/220vac 1/2" Clean Cut (cut- 50)

★★ Check this video: ★★ https://www.youtube.com/watch?v=7Mw_0Rmimc0  Make short work of your metal cuts with a high-quality plasma cutter from SUPER DEAL. This plasma cutter has a pilot arc-striking system that allows easy starts and get a clean cut every time without dross or slag. It's like a hot knife through butter. This 240 volt plasma cutter also has a convenient digital display. Like all of our tools, our plasma cutters are engineered to provide reliable performance for the home or shop and priced to save you money. Features: Continuous current regulation, high cutting speed and smooth cutting surface makes your…


  • 【Superior performance】SUPER DEAL plasma cutter features PRO technology, more stable performance. High duty cycle result in less power consumption. More economical and effcient than the traditional cutting machine due to the high speed, high temperature and high energy plasma draught.
  • 【Exquisite workmanship】 Made of heavy duty iron. Its solid material construction makes it reliable and gives it strength that can be used for a long time. It not only can be used in businesses and DIY users, but also fully accommodating the demands of professional operators.
  • 【Digital Display】DC output Digital LCD Display, Easy Read Front Panel Air-Pressure Guage, save energy and no noise, High cutting speed, Cutting smoothly and no polish demands.
  • 【Considerable & Safe design】Built-in over-heat protection, over-voltage protection, under voltage protection and over heat protection and lack of compressed air pressure protection. Comes with wire and mask, which can prevent you from hurting while using.
  • 【Wide range of applications】Suitable for a wide range of applications including sheet metal fabrication, light industrial use, site work, automotive, ducting work, repair and maintenance services. The cutting machine not only use in businesses and DIY users but also fully accommodating the demands of professional operators.